P.O.F. p415 (HK 416 clone) with Barska red dot

<

I took out my P.O.F. p415 (HK 416 clone) with Barska Electro Sight red dot optic. The red dot sight works pretty well, and is sighted in at about 25 yards. I used PMC 55 grain ammo and got pretty good results. I really like my P.O.F. p415. It's accurate, easily modified, a bit on the heavy side, but really a great rifle. It has an "18 heavy barrel and a great HK style front sight. I use a Stag Arms lower with the POF upper and I've had good luck with just about all the mags I've used. I bought some Tapco mags for $10 a piece and they work great so far. I really like the Korean HK 416 knock-off magazines as well. The POF p415 upper is a bit pricey, but if you want quality and accuracy, POF is the way to go. If I had the money, I'd like to get one of their 7.62x51 (.308) models.

Lone Wolf 40-9 (9mm) Conversion Barrel for Glock 23 (.40 cal)

I bought a Lone Wolf 40-9mm conversion barrel for my Glock 23, along with some KCI after market Glock 19 mags. I bought four magazines that came with mag pouches. All four of them worked without a hitch. Not bad for $40 total. I wasn't sure how the 40-9 conversion barrel would perform, but it was FANTASTIC! I just dropped it in and used the Glock 19 mags. I didn't have to change out the ejector or anything else. The barrel was really accurate, and was basically point and shoot. It only cost $99 and I can now shoot lead (sans jacket) bullets without worrying about a KB.

I had a lot of fun shooting with my LW 40-9 barrel and went through about 300 rounds in two different sessions. The shots were fired mostly from about 20 feet, but some were at the 5-7 range. My wife LOVED it! I recommend this barrel to those who want to save money while practicing, but want to have a .40 cal pistol at the same time.

Glock 23 Review

It's been a while since I last posted anything, so I thought that I'd write a bit about my new purchase. Last weekend at the gun show I picked up a Glock 23, which is a .40 S&W mid sized pistol. It came with two standard 13 round magazines. The 40 S&W ammo isn't cheap, but it's less expensive than 45 ACP ammo. I also just ordered a Lone Wolf 9mm barrel that can be used in my G23. I can use Glock 9mm mags with it too, so that's really cool. The Glock 23 is a rally nice pistol, with not much reccoil and the 40 S&W round isn't bad to shoot at all. I really like the 45 ACP round, so smaller rounds were a step down recoil wise. I had one failure to eject, but I that's part of the break in process. It was fun to shoot and I can't wait to get out there again. I want to use it as my CCW once I get the permit. Here is my short review and some video and pics as well. Enjoy!

Fakelite "faux bakelite" 7.62x39 Magazine for AK-47

My brother Nate and I testing my Fakelite "faux bakelite" 7.62x39 Magazine for the AK-47 type rifle. After making (painting) these mags with Krylon Fusion "burgundy" spray paint, Nate and I took them out for some field testing. The paint job held up quite well. It was pretty cold out that day. Well, cold for the South anyhow. These fakelite mags are easily made, look cool and will save you from shelling out $40-$80 for the real 7.62x39 bakelites. I hope this inspires you to try it yourself and post a video and pics of your creations!

Yugo M70AB2 modification project (part II)

Ok folks, here are some pics of my finished Yugo M70AB2 modified rifle. This rifle is no beauty queen, but the paint doesn't look too shabby either. The real test will be when I put a couple hundred rounds through it. We'll see how well the paint stands up to the heat, and if the weld holds. I hope to try it out this Saturday. I'll post some video of the test session. I hope that it doesn't rain.

Yugo M70AB2 modification project (part I)

Let's talk AK mods. There are those out there who are completely against it, and view it as a sin and then there are those of us who appreciate the classic AK look, but don't see anything wrong with updating our rifles with all the bells and whistles that modern society has to offer. I happen to be one of the later. Now, I didn't get crazy here, but decided to change the sights, grips, and add a cushioned recoil pad.

My rifle started out as a standard, no frills factory model Yugo m70ab2 undefolder AK type rifle. I think that factory handguards on the m70ab2 are somewhat boring looking, so I swapped them out with an AK-47 Leapers UTG M70 Yugo Tactical Quad Rail. This allows me to add optics and grips, etc. I put a Bushnell Trophy red dot on it, and zeroed it in at about 25 yards. It works great.




I also added a recoil pad, as the metal underfolding stock against my shoulder wasn't horrible, but didn't feel that great either. I have yet to try this out while firing the file, but it feels really nice when I shoulder it.




Here's what the rifle looked liked after adding these mods.




I was pretty happy until I saw a site online where they were adding H&K front and rear sights to AK's. Now that looks cool. So, I bought some HK G3 front and rear sights and had my local gunsmith put them on. He did a great job, but I should have told him to put the front sight post on as close to the gas block as possible. Well, my father and a friend cut a piece of conduit and welded it to the gas block. I think that it looks pretty darn cool. The weld is a bit rough, but looks cool. I applied a coat of aerosol Hi-Heat Spray Paint (made for use on grills, etc.) to give it a flat look and paint the metal conduit pipe. I have to wait another 48 hours to added another coat.

Here are some pics of the unfinished AK mod. I have the rifle tapped in order to paint it. I can't wait to add the final coats of paint and take this baby out for a test drive. I will post the final pics, along with a video and range report once it's ready. In the meantime, here are some pics of the mod in its current stage.

The Way of the Sniper - Men's Journal Article

One of my friends at work let me borrow his latest issue of Men's Journal, which features a well written story about the way a sniper operates and how they think. It provides some interesting insight to both of these, as well as other facets of the life of a sniper. It's a nice short read.

Check it out here:

http://www.mensjournal.com/sniper

"Fake-lite" Faux Bakelite 7.62x39 magazine

I've always thought that bakelite magazines looked really cool. I've always thought that they were made solely for the 5.45x39 round. Several years ago I saw a bakelite mag in a SAR-3 rifle (5.56x45 AK). I believe that it was an AK-74 bakelite with a .223 (5.56x45) follower. I've never tried this, but I've heard mixed reports on the performance and reliability. The problem with a standarized 5.56x45 AK magazine is a story in of itself.

Well, I wanted a bakelite 7.62x39 magazine, and until about a month ago, didn't even know that they existed. I found some for sale on Gun Broker. These were made in China and Russia. They both looked great, but the cheapest I could find them for was $70!



Forget that. So, I decided to make my own "fake-lite" or faux bakelite 7.62x39 mags. I used 30 round polymer (Bulgarian and ProMag) magazines and paint them with several layers of Krylon Fusion for Plastic aerosol spray paint. This paint is designed specifically for use on plastic (in this case, poly mags). I still need to work on my painting skills, but I was pretty happy with the way the mags turned out. Now I just need to test them, which I hope to do soon. I will make sure to post a range report on my findings. So, far they are a cheap alternative to the Tula and Norinco real deal.

The U.N.'s global anti firearms agenda. Get the U.N. out of the U.S.

This video is dated, but still holds true. Let's stop footing the bill for these fools and get them out of the U.S.

German Mauser K98 Rifle (Kar98k)

Ladies and gents, it's time to sell one of my rifles to fund another purchase for my firearms addiction. This one just so happens to be the very first firearm that I every purchased. It's the first one I've ever owned for that matter. This is the gun that started it all for me, the truly awesome German Mauser K98 rifle (Kar98k).

I've loved the Mauser K98 rifle ever since I was a kid. My grandfather was a captain in the U.S. Army, in Europe during WWII. Among other actions, he was served as the lookout for an m18 Hellcat tank destroyer. The Hellcat took a direct hit from a German panzer, which sent him flying out of the open turret and over a wall. He ended up with a broken leg, but that was about it. He stayed in Europe until 1946 and then came back home with a bag full of goodies.



As a kid, my family would go to Ohio to visit my grandparents. At some point in our visit we'd ask my dad if we could go up to the attic and see our grandpa's war souvenirs. Some of the items were there because my dad got them by trading some of the stuff his dad brought back from WWII for the stuff that the neighborhood kid's fathers brought back. So, he ended up with the following items: a Japanese fighter pilot's cap and goggles. A Japanese officer's steel helmet, a Luger pistol, a fallschirmjager helmet, a NSDAP part flag, and a J.G. Anschutz 4mm training rifle that was built to instruct the German youth in the art of war. I loved that rifle. It was a faithful, smaller facsimile of the Mauser K98 rifle. It had the look and feel of the K98. I loved the bolt action. There was something so cool about it, with all the history behind it. I'd always look forward to our time in the attic with that rifle.

Well, about 15-20 years later, still enamored with the K98 (and pretty much all German weapons from WWII) I purchased my first firearm, the Mauser K98. I looked for a good quality Mauser K98 for quite some time before I decided to purchase this one. The rifle is in very good condition and has been well taken care of over the years. The laminate wood stock is also in very good condition, with some scratches and wear (this rifle did see combat). The gun bluing is very good. The top of the receiver is marked with a maker's code, date, and proof marking. However, I unfortunately forgot to make note of this information before I had the scope mounted and it now covers these markings. I was told that this particular rifle came from one of the factories known for its excellent workmanship and was favored for use as a sniper's rifle. That being the reason I bought it.




I wanted more than a conversation piece though. I wanted a rifle that could actually be fired, and one that was accurate. It turned out to be a great shooter, with a very good bore and I sighted in at 100 yards with a BSA scope. Before the scope was added I just shot it using the iron sights, which I actually prefer. It has a good bit of recoil, but that just took some getting used to. The rifle is just so much fun, and one of my all time favorites. But alas, as I don't have the chance to do much distance shooting, which the rifle was designed for, I've decided to sell it to purchase another firearm. Maybe I'll get another one in the future, and I'll stick with the iron sights. I've really enjoyed owning and firing this weapon over the years and I recommend it to anyone looking to own a piece of history that's also lots of fun to use.

The great outdoors

I went to my friend Scott's place to try out some new mags, rifles, and for a bonfire. We tested his Colt M4 .22lr tactical rifle, which was really nice. I got to fire an M&P 40c that one of his police buddies brought. I thought that it would be somewhat awkward to hold, due to its small size, but it was really ergonomical and I had no trouble with it at all. Even with the shortened grip it handled nicely. It was pretty accurate too. I took one of the new Tapco AR 30 round polymer magazines that I picked up at the last gun show for $10. It feed well and seems to be a good buy. At $10, I'd buy some more. I used the mag on his Bushmaster AR type rifle (I don't recall the model). That rifle shoots really well and ate up the Wolf 62 gr. and PMC .223 ammo. We fired a Mossberg 500 and an intersting Colt 22. As it got dark we made our way to the bonfire that was built like a tepee, and grilled some dogs. It was another fun day at the range.

Colt / Umarex M4 Carbine .22 Tactical Rimfire AR-15

With the price of ammo still pretty high, and the realization that people still want to fire their AR type rifles, Colt and Umarex have teamed up and tapped into that market. In an effort to provide affordability without giving up the cool factor, they have produced the Colt M4 .22 Tactical Rimfire. I was skeptical when I first saw it. I sold my Ruger 10/22 not long ago. Not because it wasn't a great rifle, but because it just wasn't as fun as my AR or AK types. I even bought an MG-42 kit to dress it up, but that didn't help. The Colt / Umarex M4 Carbine in 22 long, is a different story. It has the look and feel of a Colt AR, but it's lighter and provides an inexpensive way to do a ton of plinking. We used mostly Federal, which fires really well. We also put a couple of rounds of Remington through it, but it didn't load well at first. If you like AR rifles, but don't have the cash for a bunch of .223 or 5.56, I suggest that you try one of these.